RUNNER CLEARANCE MONITORING

The runner blade clearance sensor measures changes in the distance between the tip of the turbine blades and the surface of the throat ring.

The surface of the turbine blade tip consists of a conductive NiCr material that absorbs the high-frequency eddy currents generated by the measuring probe in such a way as to provide an electrical signal, proportional to the air gap.

The probe itself is flush mounted on the groove ring, at the turbine centerline. It measures static and dynamic distances in the harsh hydraulic environment of large hydroelectric power plants. This monitoring is called “runner clearance” with Francis turbines, or “water gap” with Kaplan turbines.

Runner clearance monitoring

Typical faults detections

  • Off-center leading to efficiency reduction
  • Turbine-to-throat ring rub

Typical installation

2 to 5 sensors uniformly installed around the throat ring, flush mounted

Monitoring parameters

  • MPS: Min gap
  • CMS: Blades profile and polar view
Applications
Hydropower units
Sensors
Runner clearance probe icon
Runner clearence probes
Acquisition Systems & Software
Rhino PMS-300P logo
Rhino PMM-300P logo
Rhino PMS-305P logo
Orca CMS-500P logo
MONITORING SOLUTIONS
Air gap monitoring icon
AIR GAP MONITORING
Endwinding monitoring icon
ENDWINDING MONITORING
Roller bearing monitoring icon
ROLLER BEARING MONITORING
Shaft and bearing vibrations icon
SHAFT & BEARING VIBRATION MONITORING
Runner clearance monitoring icon
RUNNER CLEARANCE MONITORING
Axial thrust position monitoring icon
AXIAL THRUST POSITION MONITORING
Magnetic flux monitoring icon
MAGNETIC FLUX MONITORING